Quick Link
Quick Contact
Address
606#, Building-B, Dicui Rd. 100, Binhu, Wuxi, Jiangsu, China
Tel
86-510-85163211
Our Newsletter
Subscribe to our newsletter for discounts and more.
2026-09-16
Pharmaceutical manufacturers require reliable high-purity water for equipment rinsing, solution preparation, cleaning processes, and other critical production applications. Water quality must remain stable because ionic impurities, silica, microorganisms, and organic contaminants may affect product quality, equipment cleanliness, and regulatory compliance.
A continuous electrodeionization system using Veolia EDI membrane stacks can be installed downstream of reverse osmosis to continuously remove residual ions from the water. Compared with conventional mixed-bed ion exchange systems, EDI can operate with low or no chemical regeneration during normal operation, helping reduce chemical handling and simplify water treatment management.
Pharmaceutical water systems may experience the following challenges:
Residual ionic impurities after reverse osmosis
Unstable conductivity or resistivity
Silica and weakly ionized contaminant breakthrough
Frequent replacement or regeneration of polishing equipment
Chemical storage and handling requirements
Inconsistent water quality during continuous production
Risk of contamination in distribution loops
Difficulties maintaining documented operating parameters
High maintenance requirements for aging deionization systems
The core challenge is:
How to produce stable, high-purity water continuously while reducing chemical consumption, operational complexity, and contamination risks.
EDI is a water treatment technology that combines ion exchange resin, ion-selective membranes, and a direct-current electric field.
A typical EDI process works as follows:
Reverse osmosis removes most dissolved salts, particles, microorganisms, and organic contaminants.
RO permeate enters the EDI stack.
Residual cations and anions are captured by ion exchange media.
The electric field drives cations and anions through selective membranes toward the concentrate compartments.
Purified water leaves the dilute compartments as deionized product water.
Concentrate and electrode streams are discharged or managed according to the system design.
A simplified process flow is:
Pretreated Water → Reverse Osmosis → Veolia EDI Membrane Stack → UV Treatment or Final Polishing → Purified-Water Storage Tank → Distribution Loop
The actual design depends on feedwater quality, required conductivity or resistivity, flow rate, temperature, carbon dioxide level, silica concentration, and pharmaceutical water standards.
EDI can continuously remove residual ions without the routine acid and caustic regeneration typically required by conventional ion exchange polishing systems.
Lower chemical regeneration requirements may simplify chemical storage, handling, wastewater management, and operating procedures.
When correctly designed and operated, EDI can provide consistent deionized water quality downstream of RO.
EDI systems can be integrated with conductivity, resistivity, flow, pressure, temperature, and alarm monitoring for centralized operation.
Continuous operation can reduce interruptions associated with conventional resin regeneration and replacement activities.
EDI capacity can often be configured through multiple modules or stacks, allowing the system to support phased production expansion.
A pharmaceutical high-purity water system may include:
Raw-water pretreatment
Multimedia filtration
Activated carbon or alternative dechlorination treatment
Water softening or antiscalant dosing, where appropriate
Cartridge filtration
Reverse osmosis
Veolia EDI membrane stacks
Ultraviolet treatment
Ultrafiltration or final membrane polishing
Sanitizable storage and distribution loop
Online conductivity or resistivity monitoring
Total organic carbon and microbiological control, where required
EDI should not be used as a substitute for proper pretreatment. High levels of hardness, chlorine, iron, oil, suspended solids, or organic contamination may damage performance or shorten stack service life.
Before requesting a quotation, provide:
RO permeate analysis
Inlet conductivity
Silica concentration
Carbon dioxide concentration
Hardness and alkalinity
Temperature range
Required product-water flow rate
Required conductivity or resistivity
Available electrical power
Existing EDI model and dimensions, if replacing a stack
Connection type and installation space
Delivery country and destination port
For replacement projects, the existing stack nameplate, model number, serial number, connection dimensions, and operating history are especially important.